توضیحات کامل :

ترجمه مقاله مقایسه بیوگازهای بهبود دهنده ی کارایی غشاهای ماتریس ترکیبی مختلف در 15 صفحه فارسی ورد قابل ویرارش با فرمت doc به همراه اصل مقاله انگلیسی

 

 


عنوان فارسی :

مقایسه بیوگازهای بهبود دهنده ی کارایی غشاهای ماتریس ترکیبی مختلف

عنوان انگلیسی :

Comparison of biogas upgrading performances of different mixed matrix membranes

تعداد صفحات فارسی : 15 صفحه ورد قابل ویرایش

سطح ترجمه : متوسط

شناسه کالا : y1098

دانلود رایگان مقاله انگلیسی : http://ofmas.ir/dlpaper/y1098.pdf

دانلود ترجمه فارسی مقاله : بلافاصله پس از پرداخت آنلاین 19 هزار تومان قادر به دانلود خواهید بود .


بخشی از ترجمه :


چکیده
در این مطالعه، غشاهای مرکب ساخته شده با معرفی زئولیت 3A،4A و 5A در پلیمید (PI) و پلی اتریمید (PEI) برای افزایش کارایی تفکیک شان برای ترکیب گازی CO2 و CH4 ،مولفه های اصلی بیوگاز هستند.اثرات دماهای تابکاری بار های زئولیت، فشارهای سوخت رسانی (تغذیه) و گاز ترکیبی و سوخت رسانی های بیوگازی بر روی تفکیک CO2-CH4 از طریق غشاها بررسی میشوند.هم چنین بررسی شده است آیا یک رابطه بین ظرفیت جذب سطحی گاز و کارایی های تفکیک غشاها ساخته شده است یا خیر.غشاها ویژه ی آنالیز DSC,TGA,SEM بود.آزمایشات نفوذ گاز خالص و گاز ترکیبی یا  تفکیک بیوگاز بیانگر این بود که غشاهای ماتریس ترکیبی (MMMS) با معرفی زئولیت 4A در PI آماده شد که یک داوطلب مناسب برای تفکیک C02/CH4 و یا غنی سازی متان از بیوگاز می باشد. بار زئولیت در PEI نفوذ پذیری های CO2  و CH4 را بیشتر از PI/zeolote-MMMs نشان داد.اما هرچه بار های  زئولیت بالاتر باشد، سبب میشود گزینش پذیری های co2/ch4  برای PI/zeolote-MMMs در کل فشارهای سوخت رسانی به کار رفته، پایین تر باشد.نتایج هم چنین نشان داد، یک رابطه جزئی بین نفوذ پذیری گازی و ظرفیت جذب سطحی غشاهای بکار رفته وجود دارد.
نتایج آزمایشات تفکیک بیوگاز نشان داد، محتوای CO2  در گاز نفوذ یافته ،به اندازه 95% در فشار سوخت رسانی 3 بار افزایش یافت.بالاترین محتوای CO2  در گاز نفوذ یافته، زمانی کسب شد که PI/4A-MMMs بکار رفت و توسط PI/3A، PI خالص، PI/5A ،PEI خالص،PEI/5A،PEI/4A و PEI/3A دنبال شد.






Abstract

In this study composite membranes were manufactured by introducing zeolite 3A, 4A and 5A within polyimide (PI) and polyetherimide (PEI) in order to increase their separation performances for the gaseous mixture of CO2 and CH4 which are main components of the biogas. The effects of annealing temperatures, zeolite loadings, feed pressures and mixed gas and biogas feedings on the separation of CO2–CH4 by membranes were investigated. It has also investigated that whether there is a relation between gas sorption capacity and separation performances of membranes manufactured. Membranes were characterised DSC, TGA and SEM analysis. The pure gas permeation and the mixed gas or biogas separation experiments indicated that the mixed matrix membranes (MMMs) prepared by introducing zeolite 4A into PI is a suitable candidate for CO2/CH4 separation and/or methane enrichment from biogas. Zeolite loading into PEI increased the CO2 and CH4 permeabilities more than PI/zeolite-MMMs showed. But, the higher the zeolite loadings caused the lower the ideal CO2/CH4 selectivities for PEI/zeolite-MMMs at all the feed pressures applied. The results also showed that there is a partial relation between gas permeability and sorption capacity of membranes used.

The results of biogas separation experiments showed that the CO2 content in the permeated gas increased as much as 95% at 3 bar feed pressure. The highest CO2 content in the permeated gas was obtained when PI/4A-MMM was used, and followed by PI/3A, pure PI, PI/5A, pure PEI, PEI/5A, PEI/4A and PEI/3A.